Effective	08AUG2011
Filed	08AUG2011
Filing Codes	IC

Except as otherwise provided in individual Tariff Rules,
Rate Items or TLIs, rates and charges named in this Tariff
are stated in U.S. Currency and apply per weight unit, per
measurement unit, per container or lumpsum per shipment as
specified.  Calculation of freight and additional charges
will be based upon the applicable rate, times the number of
units tendered for transportation, subject to the
provisions named below.
     
a. Rates and/or additional charges stated on a weight unit
   basis ("W") apply per ton of 100 pounds.
     
  i. Freight and additional charges on shipments subject
     to rates or charges stated on a weight unit basis
     will be computed on the gross weight of the cargo
     PLUS the weight of all packing materials, pallets or
     shipping containers (exclusive of the weight of the
     ocean container) established at the time cargo is
     tendered for transportation at origin.
     
 ii. Carrier reserves the right to weigh or reweigh, on
     certified scales, any cargo tendered for shipment.
     Any weight so ascertained by the Carrier shall be
     deemed paramount and shall be used to compute freight
     and additional charges regardless of any other
     weight, certified or otherwise, declared or provided
     by the Shipper or his agent.  Shipper may however at
     his own expense, seek independent certification of
     the accuracy of any scales utilized by the Carrier.
     
b. Rates and/or additional charges stated on a measurement
   unit basis ("M") apply per cubic foot.
     
  i. Freight and additional charges on shipments subject
     to rates or charges stated on a measurement unit
     basis will be computed on the overall measurement of
     each piece, package or unit in the shipment.  The
     cubical content of each piece, package or other unit
     shall be the extreme dimensions of the length, width
     and height of such piece, package or unit.
     
 ii. Before any other calculations are made all fractional
     centimeter or inch dimensions will be disposed of as
     follows:
     
   1. All fractions of less than one-half centimeter/inch
      shall be rounded up to the next full centimeter/inch.
     
   2. All fractions of one-half centimeter/inch or more
      shall be rounded up to the next full
      centimeter/inch.
     
iii. When calculating the cube of any piece, package or 
     unit in a shipment, fractional cubic feet/meters are
     to be rounded off to the second decimal as follows: 
     fractions of less than .005 are to be dropped,
     fractions of .005 or greater are to be increased to
     the next higher second decimal.
     
 iv. When calculating freight and additional charges of
     an irregular or unusually shaped piece, package or
     unit, the 3 (three) greatest dimensions shall be used
     as the rating measurements. 
     
  v. When calculating freight and additional charges of 
     Barrels, Casks, Kegs and Drums, the extreme outside
     diameter will be used to calculate the cubic
     measurement.
     
 vi. When calculating freight and additional charges of 
     rolls and cylindrical pieces, packages or units, the 
     extreme outside diameter will be used to calculate the
     cubic measurement.
    
vii. Whenever an individual piece, package or other
     shipping unit is tendered for transportation and it
     is requested by Shipper, or is necessary because of
     the nature of the cargo or its packaging, that no
     cargo be stowed on top of same, Carrier will use the
     maximum inside height dimension of the transporting
     container as the height of the cargo when calculating
     the freight or assessorial charges.
     
viii. Where rates named in this Tariff are stated on a 
     weight basis and apply ONLY when the measurement of 
     the cargo is not to exceed a stated cubic measurement 
     unit per a stated weight unit, the total measurement 
     of the commodity, subject to such limitation, moving 
     on a single B/L will be the used to determine the 
     applicable rate when calculating freight charges 
     instead of utilizing the measurement/weight ratio of 
     each individual piece, package or unit in the 
     shipment.
       
c. Rates and/or additional charges stated on an
   alternating weight unit or measurement unit apply per
   the weight or measurement unit, defined in paragraphs a.
   or b. above, whichever produces the greatest revenue to
   the Carrier.
     
d. Rates and/or additional charges stated on a per
   container basis ("PC") apply per single container by
   capacity and type as defined below:
     
CODE   CONTAINER TYPE         CODE   CONTAINER TYPE
 AC    Atmosphere Control      PC    Dry Container
 DF    Drop Frame              PL    Platform
 FB    Flat Bed                RE    Reefer
 FR    Flat Rack               TC    Tank Container
 GC    Garment Container       TL    Top Loader
 HH    Half-Height             TR    Trailer
 IN    Insulated               VR    Vehicle Rack
 OT    Open Top
  
CODE   CONTAINER SIZE         CODE   CONTAINER SIZE
 10X   10ft. long, any height  LTL   Less Than Load
 20    20ft. long, 8'6"high    43    43ft. long, 8'6"high
 20S   20ft. long, 8'0"high    43S   43ft. long, 8'0"high
 20A   20ft. long, 9'0"hicube  43A   43ft. long, 9'0"hicube
 20B   20ft. long, 9'6"hicube  43B   43ft. long, 9'6"hicube
 20X   20ft. long, any height  43X   43ft. long, any height
        
 24    24ft. long, 8'6"high    45    45ft. long, 8'6"high
 24S   24ft. long, 8'0"high    45S   45ft. long, 8'0"high
 24A   24ft. long, 9'0"hicube  45A   45ft. long, 9'0"hicube
 24B   24ft. long, 9'6"hicube  45B   45ft. long, 9'6"hicube
 24X   24ft. long, any height  45X   45ft. long, any height
        
 35    35ft. long, 8'6"high    48    48ft. long, 8'6"high
 35S   35ft. long, 8'0"high    48S   48ft. long, 8'0"high
 35A   35ft. long, 9'0"hicube  48A   48ft. long, 9'0"hicube
 35B   35ft. long, 9'6"hicube  48B   48ft. long, 9'6"hicube
 35X   35ft. long, any height  48X   48ft. long, any height
     
 40    40ft. long, 8'6" high   42    42ft. long, 8'6"high
 40S   40ft. long, 8'0" high   42S   42ft. long, 8'0"high 
 40A   40ft. long, 9'0" high   42A   42ft. long, 9'0"hicube
 40B   40ft. long, 9'6" high   42B   42ft. long, 9'6"hicube
 40X   40ft. long, any height  42X   42ft. long, any height
     
e. Rates and/or additional charges stated on a lumpsum
   basis apply per a single complete unit or shipment not
   exceeding a specified maximum weight or measurement
   unit or a maximum number of containers.
     
f. CORRECTIONS IN WEIGHT AND/OR MEASUREMENTS OR FREIGHT
   CHARGES:  All freight and assessorial charges are billed
   on the basis of merchandise description, weight and/or
   measurement.  Charges are in all cases SBJ to revision
   and correction if the description, weight and/or
   measurement is found to be incorrectly stated or
   declared. Regardless of the party responsible for the
   original error, application for an amendment in freight
   charges MUST be presented in writing within 2 (two)
   weeks after date of shipment.  Adjustments to freight
   and charges due to an alleged error in weight or
   measurement may be declined, unless application is
   submitted promptly to permit re-weighing or re-measuring
   before Cargo leaves Carrier's possession.  Any costs and
   expenses incurred for re-weighing or re-measuring will
   be for the account of the party responsible for the
   error or by the applicant if no error is found.

Table Of Contents