RULE: 2.2 - APPLICATION OF TARIFF RATE BASIS & CALCULATION OF CHARGES Eff: 09AUG1996

Effective 09AUG1996
Filed 10JUL1996
Filing Codes I

Except as otherwise provided in individual Tariff Rules,
Algorithms or TLIs, rates and charges named in this Tariff
are stated in U.S. Currency and apply per weight unit, per
measurement unit, per container or lumpsum per shipment as
specified.  Calculation of freight and additional charges
will be based upon the applicable rate, times the number of
units tendered for transportation, subject to the
provisions named below.
     
a. Rates and/or additional charges stated on a weight unit
   basis ("W" or "W-ton") apply per ton of 1000 kilos.
     
  i. Freight and additional charges on shipments subject
     to rates or charges stated on a weight unit basis
     will be computed on the gross weight of the cargo
     PLUS the weight of all packing materials, pallets or
     shipping containers (exclusive of the weight of the
     ocean container) established at the time cargo is
     tendered for transportation at origin.
     
 ii. Carrier reserves the right to weigh or reweigh, on
     certified scales, any cargo tendered for shipment.
     Any weight so ascertained by the Carrier shall be
     deemed paramount and shall be used to compute freight
     and additional charges regardless of any other
     weight, certified or otherwise, declared or provided
     by the Shipper or his agent.  Shipper may however at
     his own expense, seek independent certification of
     the accuracy of any scales utilized by the Carrier.
     
b. Rates and/or additional charges stated on a measurement
   unit basis ("M" or "M-ton") apply per cubic meter.
     
  i. Freight and additional charges on shipments subject
     to rates or charges stated on a measurement unit
     basis will be computed on the overall measurement of
     each piece, package or unit in the shipment.  The
     cubical content of each piece, package or other unit
     shall be the extreme dimensions of the length, width
     and height of such piece, package or unit.
     
 ii. Before any other calculations are made all fractional
     centimeter or inch dimensions will be disposed of as
     follows:
     
   1. All fractions of less than one-half centimeter/inch
      shall be dropped.
     
   2. All fractions of one-half centimeter/inch or more
      shall be rounded up to the next full
      centimeter/inch.
     
iii. When calculating freight and additional charges of
     an irregular or unusually shaped piece, package or
     unit, the 3 (three) greatest dimensions shall be used
     as the rating measurements.  When calculating freight
     and additional charges of Barrels, Casks, Kegs, Drums
     or other cylindrical shipping units, measurements
     shall be taken on the square of the bilge.
     
 iv. Whenever an individual piece, package or other
     shipping unit is tendered for transportation and it
     is requested by Shipper, or is necessary because of
     the nature of the cargo or its packaging, that no
     cargo be stowed on top of same, Carrier will use the
     maximum inside height dimension of the transporting
     container as the height of the cargo when calculating
     the freight or assessorial charges.
     
c. Rates and/or additional charges stated on an
   alternating weight unit or measurement unit apply per
   the weight or measurement unit, defined in Rule 2.2 
   paragraphs a. or b above, whichever produces the 
   greatest revenue to the Carrier.
     
d. Rates and/or additional charges stated on a per
   container basis ("PC") apply per single container by
   capacity and type as defined below:
     
CODE   CONTAINER TYPE         CODE   CONTAINER TYPE
 AC    Atmosphere Control      PC    Dry Container
 DF    Drop Frame              PL    Platform
 FB    Flat Bed                RE    Reefer
 FR    Flat Rack               TC    Tank Container
 GC    Garment Container       TL    Top Loader
 HH    Half-Height             TR    Trailer
 IN    Insulated               VR    Vehicle Rack
 OT    Open Top
     
CODE   CONTAINER SIZE         CODE   CONTAINER SIZE
 20    20ft. long              43    43ft. long
 24    24ft. long              45S   45ft. long, 8'0"high
 35    35ft. long              45    45ft. long, 8"6"high
 40S   40ft. long, 8'0"high    45A   45ft. long, 9'0"hicube
 40A   40ft. long, 8'6"high    45B   45ft. long, 9'6"hicube
 40B   40ft. long, 9'0"hicube  45X   45ft. long, any height
 40X   40ft. long, any height  48    48ft. long, any height
 42    42ft. long
     
e. Rates and/or additional charges stated on a lumpsum
   basis apply per a single complete unit or shipment not
   exceeding a specified maximum weight or measurement
   unit or a maximum number of containers.
     
f. CORRECTIONS IN WEIGHT AND/OR MEASUREMENTS:  All freight
   and assessorial charges billed on the basis of weight
   and/or measurement are in all cases SUBJECT to revision
   and correction if the weights and/or measurements are
   found to be incorrectly stated or declared regardless
   of the party responsible for the original error.

Table Of Contents