RULE: 2.2 - APPLICATION OF BASIS FOR RATES & CALCULATION OF CHARGES Eff: 26MAR2020
|
Effective |
26MAR2020 |
|
Filed |
26MAR2020 |
|
Filing Codes |
IC |
Except as otherwise provided in individual Tariff Rules, NRAs, or on
any Web Rate Page in a Tariff governed by this Tariff, rates and
charges named in this Tariff, in any NRA, or on any Web Rate Page
in a Tariff governed by this Tariff are stated in U.S. Currency and
apply per weight unit, per measurement unit, per container, per each
unit or lumpsum per shipment as specified. Calculation of freight
and additional charges will be based upon the applicable rate, times
the number of units tendered for transportation, subject to the
provisions named below.
a. Rates and/or additional charges stated on a weight unit
basis ("W" or "W-ton") apply per ton of 1000 kilos.
i. Freight and additional charges on shipments subject
to rates or charges stated on a weight unit basis
will be computed on the gross weight of the cargo
PLUS the weight of all packing materials, pallets or
shipping containers (exclusive of the weight of the
ocean container) established at the time cargo is
tendered for transportation at origin.
ii. Carrier reserves the right to weigh or reweigh, on
certified scales, any cargo tendered for shipment.
Any weight so ascertained by the Carrier shall be
deemed paramount and shall be used to compute freight
and additional charges regardless of any other
weight, certified or otherwise, declared or provided
by the Shipper or his agent. Shipper may however at
his own expense, seek independent certification of
the accuracy of any scales utilized by the Carrier.
b. Rates and/or additional charges stated on a measurement
unit basis ("M" or "M-ton") apply per 1 cubic meter.
i. Freight and additional charges on shipments subject
to rates or charges stated on a measurement unit
basis will be computed on the overall measurement of
each piece, package or unit in the shipment. The
cubical content of each piece, package or other unit
shall be the extreme dimensions of the length, width
and height of such piece, package or unit.
ii. Before any other calculations are made all fractional
centimeter or inch dimensions will be disposed of as
follows:
1. All fractions of less than one-half centimeter/inch
shall be dropped.
2. All fractions of one-half centimeter/inch or more
shall be rounded up to the next full
centimeter/inch.
iii. When calculating freight and additional charges of
an irregular or unusually shaped piece, package or
unit, the 3 (three) greatest dimensions shall be used
as the rating measurements. When calculating freight
and additional charges of Barrels, Casks, Kegs, Drums
or other cylindrical shipping units, measurements
shall be taken on the square of the bilge.
iv. Whenever an individual piece, package or other
shipping unit is tendered for transportation and it
is requested by Shipper, or is necessary because of
the nature of the cargo or its packaging, that no
cargo be stowed on top of same, Carrier will use the
maximum inside height dimension of the transporting
container as the height of the cargo when calculating
the freight or assessorial charges.
c. Rates and/or additional charges stated on an
alternating weight unit or measurement unit apply per
the weight or measurement unit, defined in Rule 2.2
paragraphs a. or b above, whichever produces the
greatest revenue to the Carrier.
d. Rates and/or additional charges stated on a per
container basis ("PC") apply per single container by
capacity and type as defined below:
CODE CONTAINER TYPE CODE CONTAINER TYPE
----------------------------- -------------------------------
AC Atmosphere Control MP Mafi Flatrack/Platform
CG Gas Cylinder OT Open Top
CP Collapsible PC Dry Van
DF Drop Frame PL Platform
DV Dry Van RE Refrigerated (Reefer)
FB Flat Bed RN Non-Operating Refrigerated
(Reefer)
FC Collapsible Flat Rack
FR Flat Rack TC Tank
GC Garment (GOH) TL Top Loader
TR Trailer
HH Half Height
HS High Stress VR Vehicle Rack
HT High Top, Open Top VT Ventilated
IN Insulated
----------------------------- -------------------------------
CODE CONTAINER SIZE CODE CONTAINER SIZE
----------------------------- -------------------------------
10X 10ft. long, any height LCL Less Than Load
20 20ft. long, 8'6"high 43 43ft. long, 8'6"high
20S 20ft. long, 8'0"high 43S 43ft. long, 8'0"high
20A 20ft. long, 9'0"hicube 43A 43ft. long, 9'0"hicube
20B 20ft. long, 9'6"hicube 43B 43ft. long, 9'6"hicube
20X 20ft. long, any height 43X 43ft. long, any height
24 24ft. long, 8'6"high 45 45ft. long, 8'6"high
24S 24ft. long, 8'0"high 45S 45ft. long, 8'0"high
24A 24ft. long, 9'0"hicube 45A 45ft. long, 9'0"hicube
24B 24ft. long, 9'6"hicube 45B 45ft. long, 9'6"hicube
24X 24ft. long, any height 45X 45ft. long, any height
35 35ft. long, 8'6"high 48 48ft. long, 8'6"high
35S 35ft. long, 8'0"high 48S 48ft. long, 8'0"high
35A 35ft. long, 9'0"hicube 48A 48ft. long, 9'0"hicube
35B 35ft. long, 9'6"hicube 48B 48ft. long, 9'6"hicube
35X 35ft. long, any height 48X 48ft. long, any height
40 40ft. long, 8'6" high 42 42ft. long, 8'6"high
40S 40ft. long, 8'0" high 42S 42ft. long, 8'0"high
40A 40ft. long, 9'0" high 42A 42ft. long, 9'0"hicube
40B 40ft. long, 9'6" high 42B 42ft. long, 9'6"hicube
40X 40ft. long, any height 42X 42ft. long, any height
----------------------------- -------------------------------
e. Rates and/or additional charges stated on a lumpsum basis apply
per a single complete unit or shipment not exceeding a specified
maximum weight or measurement unit or a maximum number of packages,
pallets, containers or other measureable unit.
f. CORRECTIONS IN WEIGHT AND/OR MEASUREMENTS: All freight
and assessorial charges billed on the basis of weight
and/or measurement are in all cases SUBJECT to revision
and correction if the weights and/or measurements are
found to be incorrectly stated or declared regardless
of the party responsible for the original error.
Table Of Contents
