RULE: 2.2 - APPLICATION OF TARIFF RATE BASIS AND CALCULATION OF CHARGES Eff: 07NOV2005
|
Effective |
07NOV2005 |
|
Filed |
07NOV2005 |
|
Filing Codes |
IR |
Except as otherwise provided in individual Tariff Rules
or TLIs, rates and charges named in this Tariff are stated
in U.S. Currency and apply per weight unit, per measurement
unit, per container or lumpsum per shipment as specified.
Calculation of freight and additional charges will be based
upon the applicable rate, times the number of units
tendered for transportation, subject to the provisions
named below.
a. Rates and/or additional charges stated on a weight unit
basis ("W" or "W-ton") apply per weight unit of 1000
kilos.
i. Freight and additional charges on shipments subject
to rates or charges stated on a weight unit basis
will be computed on the gross weight of the cargo
PLUS the weight of all packing materials, pallets or
shipping containers (exclusive of the weight of the
ocean container) established at the time cargo is
tendered for transportation at origin.
ii. Carrier reserves the right to weigh or reweigh, on
certified scales, any cargo tendered for shipment.
Any weight so ascertained by the Carrier shall be
deemed paramount and shall be used to compute freight
and additional charges regardless of any other
weight, certified or otherwise, declared or provided
by the Shipper or his agent. Shipper may however at
his own expense, seek independent certification of
the accuracy of any scales utilized by the Carrier.
b. Rates and/or additional charges stated on a measurement
unit basis ("M" or "M-ton") apply per measurement unit
or 1 cbm.
i. Freight and additional charges on shipments subject
to rates or charges stated on a measurement unit
basis will be computed on the overall measurement of
each piece, package or unit in the shipment. The
cubical content of each piece, package or other unit
shall be the extreme dimensions of the length, width
and height of such piece, package or unit with
fractional centimeters being disposed of as provided
in paragraph ii. below. When calculating freight
charges on B/Ls the total measurement for each rate
shall be rounded off the nearest 1/1000th (one
one-thousandth) cubic meter.
ii. Before any other calculations are made all fractional
centimeter or inch dimensions will be disposed of as
follows:
1. All fractions of less than one-half centimeter
shall be dropped.
2. All fractions of one-half centimeter or more
shall be rounded up to the next full
centimeter.
iii. Except as provided below under the exceptions, when
calculating freight and additional charges of any
irregular or unusually shaped piece, package or unit,
the 3 (three) greatest dimensions shall be used as
the rating measurements. When calculating freight
and additional charges of Barrels, Casks, Kegs, Drums
or other cylindrical shipping units, measurements
shall be taken on the square of the bilge.
iv. Whenever an individual piece, package or other
shipping unit is tendered for transportation and it
is requested by Shipper, or is necessary because of
the nature of the cargo or its packaging, that no
cargo be stowed on top of same, Carrier will use the
maximum inside height dimension of the transporting
container as the height of the cargo when calculating
the freight or assessorial charges.
c. Rates and/or additional charges stated on an
alternating weight unit or measurement unit apply per
the weight or measurement unit, defined in Rule 2.2,
paragraphs a. or b above, whichever produces the
greatest revenue to the Carrier.
d. Rates and/or additional charges stated on a per
container basis ("PC") apply per single container by
capacity and type as defined below:
CODE CONTAINER TYPE CODE CONTAINER TYPE
AC Atmosphere Control PC Dry Container
DF Drop Frame PL Platform
FB Flat Bed RE Reefer
FR Flat Rack TC Tank Container
GC Garment Container TL Top Loader
HH Half-Height TR Trailer
IN Insulated VR Vehicle Rack
OT Open Top
CODE CONTAINER SIZE CODE CONTAINER SIZE
10X 10ft. long, any height LTL Less Than Load
20 20ft. long, 8'6"high 43 43ft. long, 8'6"high
20S 20ft. long, 8'0"high 43S 43ft. long, 8'0"high
20A 20ft. long, 9'0"hicube 43A 43ft. long, 9'0"hicube
20B 20ft. long, 9'6"hicube 43B 43ft. long, 9'6"hicube
20X 20ft. long, any height 43X 43ft. long, any height
24 24ft. long, 8'6"high 45 45ft. long, 8'6"high
24S 24ft. long, 8'0"high 45S 45ft. long, 8'0"high
24A 24ft. long, 9'0"hicube 45A 45ft. long, 9'0"hicube
24B 24ft. long, 9'6"hicube 45B 45ft. long, 9'6"hicube
24X 24ft. long, any height 45X 45ft. long, any height
35 35ft. long, 8'6"high 48 48ft. long, 8'6"high
35S 35ft. long, 8'0"high 48S 48ft. long, 8'0"high
35A 35ft. long, 9'0"hicube 48A 48ft. long, 9'0"hicube
35B 35ft. long, 9'6"hicube 48B 48ft. long, 9'6"hicube
35X 35ft. long, any height 48X 48ft. long, any height
40 40ft. long, 8'6" high 42 42ft. long, 8'6"high
40S 40ft. long, 8'0" high 42S 42ft. long, 8'0"high
40A 40ft. long, 9'0" high 42A 42ft. long, 9'0"hicube
40B 40ft. long, 9'6" high 42B 42ft. long, 9'6"hicube
40X 40ft. long, any height 42X 42ft. long, any height
e. Rates and/or additional charges stated on a lumpsum
basis apply per a single complete unit or shipment not
exceeding a specified maximum weight or measurement
unit or a maximum number of containers.
f. CORRECTIONS IN WEIGHT AND/OR MEASUREMENTS: All freight
and assessorial charges billed on the basis of weight
and/or measurement are in all cases SUBJECT to revision
and correction if the weights and/or measurements are
found to be incorrectly stated or declared regardless
of the party responsible for the original error.
Table Of Contents
